Saturday, June 30, 2007

Burda June '06 - 120 Top


It's been a very long time since I made a Burda pattern in the same month that the magazine was issued. In fact I made two!

This is a pattern for a sleeveless bias (or not) top, with pleated neckline and long neckties.

I cut a size 44 and did an FBA on the front, slashing vertically through the bust point to add width - and - horizontally to add length. I rotated the darts to the three pleats, slashing and spreading them.

The fabric is a squirrelly, lovely tencel herringbone weave, that got even more squirrelly on the bias.

I used fusible interfacing on the front facings and the collar/ties. The armscye binding, the hem and the ties are all hand stitched, which was a lot faster than struggling to topstitch the fabric. To stabilise the buttonhole area before machining, I hand basted a rectangle, to help keep the bias face fabric anchored to its fused (stable) facing:



Hint - When I'm going to be machining over basting stitches, I'll use silk thread for basting. It's a lot easier to pull out and less likely to split and leave fibers in the stitches.

Mid sewing I tried this on and the weight of the fabric, on the bias, had pulled the bodice down, to the point where I was completely hanging out. So I took up the shoulders by 0.5" front and back. Otherwise, the fit is pretty good, although I had to take out 1.5" from the lower front side seams.

This is so comfortable to wear and very cool in the heat, but the three pleats along the neckline are too obvious for me. They just beg for attention, especially because of the qualities of the tencel. It looks to my eye like too much detail, what with the pleats, the ties, the collar.... So I won't be making it again.

I also made these pants - 126:


I made a muslin and had it fitted by my teacher. It needed very little attention, just some more crotch room at the inseam. The above pair is from a rough linen, which bags out really badly. My third (full length) pair are from a navy linen/rayon, so I think I'll line them to the knee. My plan is to get 2-3 pants from this pattern until I lose enough weight to cut out a new one.

Burda: Love!

3 comments:

  1. You did an awesome job! I love the sleeveless bias top and it suits you very well! The fit is perfect!

    ReplyDelete
  2. I love that top. I was thinking of making it too. Now that I have seen yours, it is definitely going on the list. Congrats on making something from the magazine in the month it arrives. I am starting to get overwhelmed with all the patterns I want to make from the magazines I have now and I have a one year subscription. After one year, I should have enough to last a lifetime.

    ReplyDelete
  3. Anonymous10:15 PM

    Great top Touran! It really looks good on you. I wonder if you would like it better if you did gathers rather than the pleats? I'm so glad you made this up beacause I've been wanting to make it too.
    I'm enjoying reading your blog, particularly the pics of your son sewing..he is adorable!
    Izzie

    ReplyDelete